Foamy T. Squirrel Posted June 15, 2014 Share Posted June 15, 2014 They're finding and pulling off posts from VK and Facebook walls! They even blacklisted this guy from membership, no doubt: http://vk.com/pkandemir Link to comment Share on other sites More sharing options...
Foamy T. Squirrel Posted June 18, 2014 Author Share Posted June 18, 2014 We have several threads going on about DMCA infringement now running: a couple pertaining to the demise of Realllifecamfan.com in Random Discussion, and one floating around Old Dudes. I will be posting information that I find HERE. Understanding DMCA enforcement AND increasing government surveillance is important for ALL Internet users. That means YOU! Here are links for those interested in the Brave New World of RLC and the Internet in general: https://www.google.com/transparencyreport/removals/copyright/reporters/18900/Tech-Fashion-Inc/#! http://www.chillingeffects.org/notice.cgi?sID=1415679 Link to comment Share on other sites More sharing options...
StnCld316 Posted June 19, 2014 Share Posted June 19, 2014 They're finding and pulling off posts from VK and Facebook walls! They even blacklisted this guy from membership, no doubt: http://vk.com/pkandemir At least 2 of the videos were left up for download. Link to comment Share on other sites More sharing options...
Foamy T. Squirrel Posted June 19, 2014 Author Share Posted June 19, 2014 At least 2 of the videos were left up for download. I am no longer as paranoid as I was. Could be lots of things involved with VK & Facebook: they are powerful companies. However, the take-down listing above(transparency report) does demonstrate their altered strategy now that they can trace their property. We shall see... Link to comment Share on other sites More sharing options...
Foamy T. Squirrel Posted June 19, 2014 Author Share Posted June 19, 2014 Let me know if you see a general internet trend here... https://www.google.com/transparencyreport/removals/copyright/ (Now, where did I put my Usenet browser? ;D ) Link to comment Share on other sites More sharing options...
itsme Posted June 20, 2014 Share Posted June 20, 2014 The rectangle in the middle is where their pattern shows up. Still trying to figure out how to shut it down. It looks like they have it rigged so that if you block certain scripts it kills the video stream. Link to comment Share on other sites More sharing options...
Foamy T. Squirrel Posted June 20, 2014 Author Share Posted June 20, 2014 Good luck with this mystery, Mr. Holmes. I'm stuck with humanistic mysteries about the women and the death of Internet freedom -- newsy wordy detective stuff. Most of us can't quite remember our Fortran or Cobol, and we're all old drunks now on this board. Your discoveries and modernistic brilliance is appreciated and respected. Besides, most of us did so much partying in college we could only handle fucking liberal arts majors: What a fucking mistake on our part. Free pass for you at Old Dudes. C'ya there. Link to comment Share on other sites More sharing options...
TBG 150 Posted June 20, 2014 Share Posted June 20, 2014 And here I am trying to figure out how to re-line the reverse cone of a Dual-Coupling Hydra-Matic Automatic transmission from the 50's. Link to comment Share on other sites More sharing options...
StnCld316 Posted June 20, 2014 Share Posted June 20, 2014 And here I am trying to figure out how to re-line the reverse cone of a Dual-Coupling Hydra-Matic Automatic transmission from the 50's. Google should be able to give you some direction. Link to comment Share on other sites More sharing options...
TBG 150 Posted June 20, 2014 Share Posted June 20, 2014 Just playin. I rebuilt that box about 4 years ago. No one around here would even touch it or they wanted near $3000. I did the whole thing for under $500 and a lot of sweat. Link to comment Share on other sites More sharing options...
StnCld316 Posted June 20, 2014 Share Posted June 20, 2014 Just playin. I rebuilt that box about 4 years ago. No one around here would even touch it or they wanted near $3000. I did the whole thing for under $500 and a lot of sweat. It's always cheaper to do it yourself or have a good friend in that line of work that works under the table. Link to comment Share on other sites More sharing options...
TBG 150 Posted June 20, 2014 Share Posted June 20, 2014 If it's mechanical, I can fix it or make the parts to fix it. But damned if I can see inside of a nanochip and fix it. Link to comment Share on other sites More sharing options...
Recommended Posts